CKC

CycleKart Tech Forum

CycleKart Plans & Drawings Thread

AutoShrine Sponsor
AutoShrine Sponsor
AutoShrine Sponsor

villam50 Marco Villarroel
Samtiago, Santiago, Chile   CHL
In reply to # 11170 by akumabito
In reply to # 9325 by Little French Hello all

My little contribution....
I'm doing right now plans of front

Looks nice, Fabrice!

The seating area looks really small though - only 459mm from dash cowl to headrest? Are you sure that's enough room to get in and out of your car?

. Hide banner ads & support this website by becoming a > Gold Supporting Member <
011173 Justin Elliott
Yarrawonga, VIC, Australia   AUS
Hello Cycle Karters,

I'm a teacher from Australia and i've stumbled across this great and very doable introduction to motorsport. I was wondering if you know if there are any plan views of the classic Stevenson cyclekart to get us started?

Justin

Woodysrods Brian Woods
Westbank B.C., Canada   CAN
Hi Justin
Sort of like this?
Woody

. Hide banner ads & support this website by becoming a > Gold Supporting Member <

Attachments:
Stevenson_CycleKart_Sketch_Side.jpg    35 KB
Stevenson_CycleKart_Sketch_Side.jpg

Woodysrods Brian Woods
Westbank B.C., Canada   CAN
PS
Even in Metric for you.
Brian

packard38coupe Charles Lovallo
sidney, bc, Canada   CAN
great drawings but I cannot find any specs on the cross member siting, ie. inches from the front or back? Also drawings as to suspending the floor from the chassis bottom. thanks guys. IM BUILDING ONE IN WOOD TO GET EVERYTHING RIGHT BEFORE i TACKLE THE METAL.

Woodysrods Brian Woods
Westbank B.C., Canada   CAN
Hi Charles
We should talk.
250 768-1912
Brian

011173 Justin Elliott
Yarrawonga, VIC, Australia   AUS
Hi Brian,

Thanks for your response. The Plan view I was seeking would show the chassis layout from above, to guide us on the positioning of the cross members on the Stevenson cart design.

Justin

. Hide banner ads & support this website by becoming a > Gold Supporting Member <
Smoky Avatar
Smoky Silver Member Don Schmok
Salmon Arm, BC, Canada   CAN
Something like this?

I moved my axle back, and mounted the engine in front, there was lots of room.

Some frames taper to the front, many are rectangular boxes. Width can be determined by the size of the driver.

I built mine for comfort, and have a large cockpit so I don’t have to remove the steering wheel to get in.



1929 Riley Bitsa


Attachments:
DDE62981-EAE7-4C81-972A-F59F9193A10A.jpeg    18.1 KB
DDE62981-EAE7-4C81-972A-F59F9193A10A.jpeg

carChips Avatar
carChips Victor Harnish
Kelowna, BC, Canada   CAN
1933 MG Magnette
1973 Triumph Spitfire 1500 "Chip"
1989 GMC Sierra 1500 "Bush Truck"
Justin, what you're seeking is the pine box that the side rails bolt to, this can vary on the size of the occupant. Most need the box to be 18" clear inside. The side rails get connected front and back with a bar, or a piece of ready rod with a tube over it.

. Hide banner ads & support this website by becoming a > Gold Supporting Member <
CmdBentaxle Avatar
CmdBentaxle Silver Member Dave D
Federal Way, Washington, USA   USA
1950 CycleKart Italian "1950 Ferrari 166 F2"
As Vic describes, there really are no cross members as such in the actual
Stevenson design. Just the wood monocoque box structure with the frame rails bolted onto the sides,
the engine mount at the back, and that spreader at the front. Cross members were added (needlessly some would say) by later builders.

. Hide banner ads & support this website by becoming a > Gold Supporting Member <

To add your reply, or post your own questions

Members Sign In   or   Create an Account

Registration is FREE and takes less than a minute!


Having trouble posting or changing forum settings?
Read the Forum Help (FAQ) or contact the webmaster





Join The Club

Sign in to ask questions, share photos, and access all website features

Your Karts

1925 CycleKart Custom

Text Size

Larger Smaller
Reset Save

Sponsor Links