Visit our Twitter feed for more great content
CKC

The Pub - Off Topic

Trailers for CK

AutoShrine Sponsor
AutoShrine Sponsor

Torro123 Avatar
Torro123 René Wesselius
Amsterdam, NH, Netherlands   NLD
Finally i build a trailer for the CK but i can use it also for bikes and other stuff.
I bought a chassis from a folding camper trailer,made it wider and the bed was made of scrapped pallet wood,made the Model A wheels fit the brake drums and presto!!!........
I do not have a picture of the CK in the trailer yet,trailer is just done and the CK is on another location stored for winter.......but you will get the idea........

. Hide banner ads & support this website by becoming a > Gold Supporting Member <

Attachments:
IMG_1891.JPG    63.4 KB
IMG_1891.JPG

IMG_1892.JPG    66.7 KB
Sign In or Register to view this photo
IMG_1893.JPG    63.8 KB
Sign In or Register to view this photo
IMG_1894.JPG    70.3 KB
Sign In or Register to view this photo
Smoky Avatar
Smoky Silver Member Don Schmok
Salmon Arm, BC, Canada   CAN
That rig will look perfect with the CycleKart in it! Well done.



1929 Riley Bitsa

gearguy Charles Schultz
Oil City, PA, USA   USA
For those without room for a trailer! More 500cc F3 creativity.

. Hide banner ads & support this website by becoming a > Gold Supporting Member <

Attachments:
lrf3.jpg    75.1 KB
lrf3.jpg

Speeddemon Avatar
Speeddemon Louis Poleet (Suspended)
Roslindale, MA, USA   USA
1970 CycleKart Custom "Rose"
Hi all theres Allways option b.. you can make one quick and for little money outa a old junked Toyota/chevy 10ft/etc uhaul it box truck. They can be found easily and for low money.at Uhaul and scrapyards and craigslist/etc cheers



Edited 6 time(s). Last edit at 2018-04-08 08:52 AM by Speeddemon.

Woodysrods Avatar
Woodysrods Silver Member Brian Woods
Westbank B.C., Canada   CAN
Chuck
You have to quit posting pictures of 500 cc F3 s.............I don't want to get hooked!eye rolling smiley
Too late! I already love the look!smiling bouncing smiley
Brian

Woodysrods Avatar
Woodysrods Silver Member Brian Woods
Westbank B.C., Canada   CAN
So, I have not posted pictures of the new CK trailer for some time, but I have continued to chip away at it.
Brian


Attachments:
P9270060.JPG    38.3 KB
P9270060.JPG

P9270061.JPG    42.1 KB
Sign In or Register to view this photo
P9270062.JPG    42.5 KB
Sign In or Register to view this photo
P9270063.JPG    39.8 KB
Sign In or Register to view this photo
PA170001.JPG    31.9 KB
Sign In or Register to view this photo
Woodysrods Avatar
Woodysrods Silver Member Brian Woods
Westbank B.C., Canada   CAN
Here is the upper structure, all constructed from Ducati shipping crates (free material)thumbs up


Attachments:
PA180001.JPG    43.1 KB
PA180001.JPG

PA180002.JPG    46.7 KB
Sign In or Register to view this photo
PA180003.JPG    39 KB
Sign In or Register to view this photo
PB010032.JPG    53 KB
Sign In or Register to view this photo
Woodysrods Avatar
Woodysrods Silver Member Brian Woods
Westbank B.C., Canada   CAN
Made the doors and prepped the aluminum skin (go a bunch of 12' .080 sheets Free!)thumbs up
Brian



Edited 1 time(s). Last edit at 2019-01-26 02:13 PM by Woodysrods.


Attachments:
P1250008.JPG    33.5 KB
P1250008.JPG

P1250009.JPG    37.6 KB
Sign In or Register to view this photo
Denny Graham Gold Member Dennis Graham
Sandwich, IL, USA   USA
1950 Chevrolet 3600 "Old Blue"
1954 Chevrolet 3600
That is one ell of a "Kart Hauler" yer building that Brian. Now since it's all
aluminum, it shouldn't take much of a tow car to haul it around.
Wish I had the garage you got there. I've been doing nothing for the
last three days but hauling in wood to keep the pig supplied. I'm goin'
thru a bucket full almost ever day or two and we've got at least another
week of this sub zero stuff. They're talkin' 8-10" tomorrow night into Monday.
So, I taint gettin' much more done than keeping it above freezing in
the shop and a little clean up around the machines.
Tractors running.....fingers are thawed out, and I'm back at the driveway.
Hope you have a productive weekend.
dg

Woodysrods Avatar
Woodysrods Silver Member Brian Woods
Westbank B.C., Canada   CAN
So, in answer to your questions that you have not asked yet??
It is 109" long (box) and 83" wide (inside) and will accommodate 2 CycleKarts
on the upper rails that are 36" below the lowest point of the roof (4' over-all inside height.
The centre will have a removable rail for the inside wheels of the CKs to sit side by side.
A Queen sized mattress fits in the lower section(58" wide), so I have a place to sleep.
There is a 1' tall tailgate that swings down out of the way, and a rear hatch that opens up as
a bit of a shade canopy, It has two doors at the front that swing to the middle )ver the tongue)
for access to the front tea down straps (from Mac's).
So this, with one CK in the box of my PU, will allow me to bring 3 CycleKarts to an event.thumbs up
So I had better get busy building those CKs.eye rolling smiley
Brian

Denny Graham Gold Member Dennis Graham
Sandwich, IL, USA   USA
1950 Chevrolet 3600 "Old Blue"
1954 Chevrolet 3600
Sheeting that with .80 aluminum plate should protect the cargo even if you get hit
broad side with a Mac truck Brian!!!! (Don't sweat it....we know what cha mean.)

If your gonna fill that by summer, you better hire the crew back and get going on
those karts. I'll bet you got a few Tear Drop shindigs to drop in to before Tieton
plus the farm chores and mowing. Times a running out buddy......for both of us.

dg

Woodysrods Avatar
Woodysrods Silver Member Brian Woods
Westbank B.C., Canada   CAN
The difference the placement of a "." can make.????thumbs up
Good news is we finally got some snow (which I am determined not to plow or shovel), which
will push back those "Farm Chores" and give me more time in the shop!hot smiley
Brian

Denny Graham Gold Member Dennis Graham
Sandwich, IL, USA   USA
1950 Chevrolet 3600 "Old Blue"
1954 Chevrolet 3600
I sure wish you would keep it north of the 49th. This afternoon, we just got a couple
more inches on top of that wet slushy carp that we got last week which froze into
ice sculptures before I could get it cleaned up. And tomorrow night.....they're telling
us that we could get 8-10 more. Taint gonna get over zero all next week and we could
get the coldest temps that we've had in decades. Yep,,,,,,,,winter is finally here. I'm loading
a few logs in the pig every hour or so trying to keep the floor from freezing. Which means I
gotta get up a half dozen times every night. And .......that's just where I'm headed right now.
DG

littletex Avatar
littletex Blake Martindale
Azle, TX, USA   USA
Little Tex here,
what class toe hitch you need to tug one of those harbor freight rigs around with the box /sides put on? I'm sure my SUV can handle it just not sure about the hitch.

Woodysrods Avatar
Woodysrods Silver Member Brian Woods
Westbank B.C., Canada   CAN
In reply to # 37845 by littletex Little Tex here,
what class toe hitch you need to tug one of those harbor freight rigs around with the box /sides put on? I'm sure my SUV can handle it just not sure about the hitch.
Our Teardrop weighs 1450 lbs loaded, and we have towed it 70,000 miles in the past 6 years with either my 1946 Studebaker PU or
my wife 2010 Hyundai Santa Fe with a 1 7/8" ball.


Attachments:
Dam Gathering May 2013 190.jpg    51.7 KB
Dam Gathering May 2013 190.jpg

P4301693.JPG    36.4 KB
Sign In or Register to view this photo
. Hide banner ads & support this website by becoming a > Gold Supporting Member <

To add your reply, or post your own questions




Registration is FREE and takes less than a minute!


Having trouble posting or changing forum settings?
Read the Forum Help (FAQ) or contact the webmaster





Join The Club

Sign in to ask questions, share photos, and access all website features

Your Karts

1938 CycleKart German

Text Size

Larger Smaller
Reset Save

Sponsor Links