CKC

CycleKart Tech Forum

New member Ed

AutoShrine Sponsor
AutoShrine Sponsor

Denny Graham Gold Member Dennis Graham
Sandwich, IL, USA   USA
1950 Chevrolet 3600 "Old Blue"
1954 Chevrolet 3600
Of course it is, DUH!!!! The shape of the bracket is the same as the shape of
the rear shackle and I couldn't make out any weld on the front hanger.
I should have known better, as fast and as well done as Ed is, it's really
dumb of me to think he could have missed anything as obvious as that.
The way Ed's movin' along, he orda have the body finished up by
Monday morning.
.
Ok, lunch break is over, heading back out to watch more paint dry,
That's my own fault for using Rustoleum in stead of some good PPG.
The only up side is it's easier to apply, that is, no mixing or cleanup
with a rattle can and brush. Besides, PPG Red is about $300 a gallon
last time I checked and a qt. of Regal Red rustoleum and a rattle can
I can get out of a twenty and have enough left over for burger, fries
and a coke.

dg

. Hide banner ads & support this website by becoming a > Gold Supporting Member <
farmkart Ed J
Armstrong, BC, Canada   CAN
Hi Neto Both flat steel are 1 1/2 so it would make the beam 1 1/2 x 1 3/4 high. Thanks Ed

farmkart Ed J
Armstrong, BC, Canada   CAN
Hi Guys I had a great visit from Brian,Victor and Martin today. They gave me good advice and steered me in the right direction!smiling smiley We also saw Martin's kart Great work progress for only two weeksthumbs up It's a good looking kart. thanks Ed

. Hide banner ads & support this website by becoming a > Gold Supporting Member <
Woodysrods Silver Member Brian Woods
Westbank B.C., Canada   CAN
Yes, Thanks Ed for having us.
Great to have 4 of our Chapter Members together!
Brian


Attachments:
P3031638.JPG    60.3 KB
P3031638.JPG

Woodysrods Silver Member Brian Woods
Westbank B.C., Canada   CAN
And here we are at Martin"s before the hard liquor came out??
Thanks mate!smileys with beer
Great Day!
Brian
Martin was looking a little blurry to me??



Edited 1 time(s). Last edit at 2018-03-03 10:32 PM by Woodysrods.


Attachments:
P3031639.JPG    38.8 KB
P3031639.JPG

P3031640.JPG    38.4 KB
Sign In or Register to view this photo
Woodysrods Silver Member Brian Woods
Westbank B.C., Canada   CAN
Here is a better shot!
Brian


Attachments:
P3031641.JPG    45.7 KB
P3031641.JPG

Woodysrods Silver Member Brian Woods
Westbank B.C., Canada   CAN
B.C Guys having fun on a winter da in the shop?smiling bouncing smiley

. Hide banner ads & support this website by becoming a > Gold Supporting Member <

Attachments:
P3031634.JPG    48.8 KB
P3031634.JPG

Martin HL Avatar
Martin HL Martin Hill Lonergan
Armstrong, BC, Canada   CAN
Moving to fast for your camera Brian, that's the only way I can keep warm in my shop. I'm thinking of shovelling a couple of ton of ice inside the shop to warm it up. Good fun today, bet Dons feeling left out, but warm?hot smiley

farmkart Ed J
Armstrong, BC, Canada   CAN
Hi Guys Some more picks Today I started making holes for rivits. I think this will take some timeconfused smiley Thanks Ed

. Hide banner ads & support this website by becoming a > Gold Supporting Member <

Attachments:
032.JPG    69.1 KB
032.JPG

031.JPG    48.6 KB
Sign In or Register to view this photo
030.JPG    66.3 KB
Sign In or Register to view this photo
carChips Avatar
carChips Victor Harnish
Kelowna, BC, Canada   CAN
1933 MG Magnette
1973 Triumph Spitfire 1500 "Chip"
1989 GMC Sierra 1500 "Bush Truck"
Good job Ed! I see you've got it steered in the right direction.



S'all for now!

Woodysrods Silver Member Brian Woods
Westbank B.C., Canada   CAN
Looking Good Edthumbs up
Thanks for the pictures.
We put in another day today and Martin's CK
He is catching up, and has a rolling chassis now!
Brian

Martin HL Avatar
Martin HL Martin Hill Lonergan
Armstrong, BC, Canada   CAN
Got home from Brian's (thanks for an awesome build day Friday & Sunday Brian) 1:10 am blurry eyed and cheeks aching through grinning ear to ear for 98 km trip back. Sooo much progress with my/by my CK guru was achieved. Great pub lunches too. Up again a 7:30 to get everything out of the car, frame n all, for daughters use.
Carrying out fatherly, husbandry & domestic chores till Thurday now but will mock up what I/we have achieved thus far and post a pic or two later. Build thread coming soon, promise

Martin HL Avatar
Martin HL Martin Hill Lonergan
Armstrong, BC, Canada   CAN
Oops, meant to post the last one in BC Chaptereye rolling smiley

Woodysrods Silver Member Brian Woods
Westbank B.C., Canada   CAN
Good Morning Ed
Martin will require exactly the same steering set up and pedal configuration as you have, so I am sure he will be over to compare notes and get some tips.
So steer him in the right direction!winking smiley
Brian

farmkart Ed J
Armstrong, BC, Canada   CAN
Hi guys I had a good day in the shop todaygrinning smiley Here are some picks. Thanks Ed


Attachments:
013.JPG    64.4 KB
013.JPG

011.JPG    66.2 KB
Sign In or Register to view this photo
002.JPG    60 KB
Sign In or Register to view this photo
. Hide banner ads & support this website by becoming a > Gold Supporting Member <

To add your reply, or post your own questions




Registration is FREE and takes less than a minute!


Having trouble posting or changing forum settings?
Read the Forum Help (FAQ) or contact the webmaster





Join The Club

Sign in to ask questions, share photos, and access all website features

Your Karts

1925 CycleKart Speedway Racer

Text Size

Larger Smaller
Reset Save

Sponsor Links